Range Selector

Purpose

This is a more sophisticated logic device than the simple Boolean devices.  The simple explanation is that if the input is between the minimum and the maximum, the output is on.  There is an additional output that is either 0% or whatever percentage that is set in the Trigger level, depending on whether the Full Output is on (Trigger Level %) or off (0%).  This device is typically used with Control Grouped input and outputs

Controls

Input

Input to the Range Selector.

Range Minimum

The minimum value that you want the input to be to have the output to be on.  This is accurate to 0.1 percent.

Range Maximum

The maximum value that you want the input to be to have the output to be on.  This is accurate to 0.1 percent.

Trigger Level

Optionally, you can enter a percentage here that will be copied to the Output Level whenever the Full Output is on.  This is useful for those instances where the device you are triggering shouldn't just have 100% or 0%, such as a level or router.

Output Level

Either 0% if the input is out of the range specified in the Minimum and Maximum or the same value as the Trigger Level if the input falls between the Minimum and Maximum.

Full Output

On or off (0% or 100%), depending on whether the value on the input is within the range of the Minimum or Maximum.