Rear View of breakout box showing audio connectors
MM88xx BoB Hardware
Analog BoB Input and Output Wiring and Level Setting
Rear View of breakout box showing audio connectors
The eight analog audio inputs appear on a "Phoenix" type connector on the back of the unit. The eight audio outputs appear on a separate "Phoenix" type connector on the back of the unit.
When an unbalanced source is connected to a breakout box analog input the Minus and Gnd pins should be tied together.
When feeding unbalanced inputs from a MediaMatrix breakout box analog output, the MINUS and GND pins should be tied. Leaving the MINUS pin unconnected will result in an output level that is reduced by 6 dB.
Control I/O Connections
The eight control inputs appear on a "Phoenix" type connector on the back of the unit. The input impedance is 20KW. The BoB is protected against excessive voltage applied at the inputs, including static discharge.
|
1 |
Control Output 1 |
|
3 |
Control Output 2 |
|
5 |
Control Output 3 |
|
7 |
Control Output 4 |
|
9 |
Control Output 5 |
|
11 |
Control Output 6 |
|
13 |
Control Output 7 |
|
15 |
Control Output 8 |
|
2,4,6,8,10,12,14,16 |
Ground |
|
17 |
Control Input 1 |
|
19 |
Control Input 2 |
|
21 |
Control Input 3 |
|
23 |
Control Input 4 |
|
25 |
Control Input 5 |
|
27 |
Control Input 6 |
|
29 |
Control Input 7 |
|
31 |
Control Input 8 |
|
18,20,22,24,26,28,30,32 |
Input Control Voltage |
Related Topics