Compile Failure

There are several reasons why a compile may fail. Some of them include:

• You have used an obsolete device in a view file design.

• While you were wiring the system, you created a feedback loop without a via device.

• You have run out of resources within your MediaMatrix system. This could include DAB transfers (intercell links), or DSP resources.

• You have created a system that would require more than eight DSP boards to build.

In most cases, by rethinking your view file design, you can correct the problem. Click on the preceding links to see discussions on each of these potential problems, and what you can do to cure them.

Related Topics

Optimizing your designs
How do I minimize processing delays through mediamatrix